best anchor for pontoon boat reviewed

Best Anchor for Pontoon Boat: 2019 Complete Buying Guide and Reviews

Some pontoon boats are fitted with deck mounted winch operated anchors. These anchors are simple to use, however, not any boat anchor will tick all the right boxes. A lot of factors such as the river/lake bottom and weight of your boat do come into play, and sooner rather later, you’ll probably find yourself in need a new anchor.

Enter the new school anchors. These anchors depend on their design rather than weight to secure your boat making them far much efficient than the traditional navy style anchors. Additionally, they are designed to fit specific types of terrains. Below are the best anchors for pontoon boats.

Best Anchors for Pontoon Boats Compared

ImageAnchorTypeWeight (lbs)Size (Inches)
Slide Anchor’s Box Anchor for Offshore Boat Anchoring Slide Anchor’s Box Anchor for Offshore Boat AnchoringBox418 x 26 x 5
Galvanized Folding Grapnel Boat by Crown Sporting Goods Galvanized Folding Grapnel Boat by Crown Sporting GoodsGrapnel1.5 – 17.59.4 x 1.8 x 1.8
Gradient Fitness Marine Folding Anchor Gradient Fitness Marine Folding AnchorGrapnel3.58 x 8 x 12
SeaSense Fluke Anchor Super Hook SeaSense Fluke Anchor Super HookFluke1628.25x 21.5×7
Extreme Max 3006.6623 BoatTector Grip and Go Digger-Style Anchor Extreme Max 3006.6623 BoatTector Grip and Go Digger-Style AnchorFluke1519.7 x 12.1 x 7.1

Reviews of the Best Anchors for Pontoon Boats

 

1. Slide Anchor’s Box Anchor for Offshore Boat Anchoring

The Best Anchor for Pontoon Boat

Slide Anchor’s Box Anchor for Offshore Boat Anchoring

The Box Anchor measures 18 x 26 x 5 inches and weighs 25 pounds making it a perfect fit for anchoring boats measuring up to 40 feet, and cabin cruisers of up to 32 feet.

Box Anchor works best in water bodies with muddy or rocky bottoms as they offer a firmer placement, holding your boat in place with ease. Turn off the boat’s engine and throw the anchor overboard and its foot-long flukes will latch into position to anchor your boat.

The Box Anchor lacks a top frame for easy retrieval. Merely pull the line to get the boat over the anchor, and it’ll unlatch from the bottom. Unlike the traditional anchors, the box anchor is designed to take care of changing wind patterns. Changes in wind direction will most certainly push the boat over the anchor, unhooking it from the surface. But as the boat sails over the top of the anchor and continues towards another docking position, the Box Anchor turns on its opposite side to latch securely in the new direction.

This anchor can be folded flat, so it doesn’t take up too much storage space. You can also unhook its stabilizing arm so that it fits in its ventilated storage bag. The box anchor is built from galvanized steel to protect it from corrosion and rusting. Aside from that, it comes in three sizes, the baby, small, and large.

Pros

  • Designed to accommodate a change in wind/current direction.
  • Easy retrieval.
  • Folds flat for neat storage.
  • Durable build.
  • It doesn’t require a chain.

Cons

  • Its welded joints don’t look sturdy enough.

2. Galvanized Folding Grapnel Boat by Crown Sporting Goods

Galvanized Folding Grapnel Boat by Crown Sporting Goods

If you are looking for a cheap solution to anchor your pontoon boat, then look no further than this grapnel boat anchor.

The anchor is built from premium quality galvanized steel which can survive extreme underwater conditions without corrosion or breaking. The anchor is fitted with four hooks that secure into place with a simple twist, excellent for anchoring your boat in coral, stone, gravel, or dense weeds. Well, other than being an anchor for your pontoon it is also great for retrieving items that have gone overboard.

Grapnel anchors are ideally suited for anchoring small boats such as dinghies, kayaks, inflatables or canoes. However, this anchor is only designed for short term use in low current areas.

Its large prongs shouldn’t be an issue when it comes to storing your anchor as they can be easily folded to fit neatly without taking up too much space.

Pros

  • It comes in a variety of sizes.
  • Durable and compact build.
  • Cheap

Cons

  • The slide comes unlocked too easily.

3. Gradient Fitness Marine Folding Anchor

Gradient Fitness Marine Folding Anchor

This 3.5lb. Marine anchor fitted with four flukes is designed for efficiency and convenient use. It comes with a padded drawstring sack for easy storage and mobility.

It is built using rust resistant material fitted with a 25-foot-long (7 mm thick) green/black marine grade rope. The anchor itself is painted green for easy visibility even in murky waters. Also included, is a PVC flotation buoy and a stainless-steel snap hook for a quick and simple connections.

The anchor is easy to use, unpack it from its bag, pull its hooks out, and toss it overboard. Its hooks will drift around and latch firmly onto a rock or dense weed to anchor your kayak. Whether the bottom is sandy, muddy, weedy, or, rocky rest assured that this anchor would hold into place.

Gradient Fitness pride themselves in designing handy gadgets and their marine anchor is no different. The anchor can be folded down into a 12” x 3” size that easily fits into its included storage bag preventing the hooks from scratching your boat.

Pros

  • Rust/corrosion resistant.
  • It is fitted with a PVC floatation buoy for easy retrieval.
  • Works great on all types of surfaces.
  • Comes with 25 feet of marine grade rope.
  • Compact design packs down to 12” x 3” size.

Cons

  • Its rope should have been longer.

4. SeaSense Fluke Anchor Super Hook

SeaSense Fluke Anchor Super Hook

Fluke anchors are fitted with elongated hooks that penetrate deep into the bottom to secure your boat into position.

This anchor from SeaSense is built using galvanized steel for durability. Besides, it can be used on different bottoms (sandy, muddy, weedy) with excellent results. Once its flukes are hooked into the surface, you can rest assured your boat is well secured.

Another impressive feature of this anchor is its power to weight ratio in comparison to other steel anchors. It offers excellent potential with regard to its lightweight nature while at the same time taking up minimal packing space.

It comes with additional features such as a chain and shackle and a retrieval ring fitted with anti-fouling systems.

Pros

  • Lightweight and compact design.
  • Rust resistant for better durability.
  • Impressive power to weight ratio.
  • It is equipped with anti-fouling mechanics.

Cons

  • Its welded joints are a weak point.
  • Its flukes aren’t strong enough and are prone to breaking.

5. Extreme Max 3006.6623 BoatTector Grip and Go Digger-Style Anchor

Extreme Max 3006.6623 BoatTector Grip and Go Digger-Style Anchor

This anchor features an exciting design complete with two sharp hooks on each side that dig deep into the bottom to help secure boats even up to 40’ firmly in fresh water.

This pontoon boat anchor weighs 15 pounds is built for simple setting and retrieval. If you find you’re sailing in a river or lake that has fast currents, this boat anchor ticks all the right boxes offering an exceptional hold even in the roughest conditions.

Lower it overboard and give it some length (5:1 recommended) to ensure it has held firm. When used in deep water or weedy conditions, provide a solid pull on the line to release the flukes and reduce accumulated weeds or debris for easier retrieval.

On to matters regarding size, the anchor’s hooks can be folded back for easy storage.

You don’t need a chain to use this anchor. It’s suitable for all kinds of surfaces, be it mud, rocks, or weeds. Ideally, it’s a versatile and reliable anchor that uses both flukes and weight to keep your boat securely in position.

Pros

  • It’s suitable for all kinds of surfaces, be it mud, rocks, or weeds.

Cons

  • Cannot be used in salty water.

Different Types of Pontoon Boat Anchors

There exist three significant types of pontoon boat anchors namely; box anchors, grapnel style and fluke anchors. Each anchor has the specific design features that set it apart while at the same time ensuring its effectiveness in securing your boat in a particular type of surface.

One factor you need to keep in mind is that the anchor you pick will significantly rely on the type of water you are going to sail in.

Box Anchors

Box anchors work best in water bodies with muddy/slightly rocky bottoms. They are typically fitted with hooks which dig deep into the mud to get a firm hold.

Just like when you’re using other types of anchors, it is vital that you have an adequate line out when tossing your box anchor. Having a shorter line will prevent the anchor’s prongs from getting the perfect angle required for firmly locking into the mud.

Fluke Anchors

Fluke anchors have characteristically long arms that burrow deep into the bottom to secure your boat. This type of anchor delivers excellent service in water bodies with gravel/sandy bottoms. An exciting feature of fluke anchors is their power to weight ratio. For example, a 16 lb. fluke anchor can comfortably secure a 24’ to 30’ pontoon boat in waters with mild currents.

Pro tip. When purchasing a fluke anchor, its size should take center stage over its weight. The weight of the anchor only helps it sink to the bottom and dig its flukes into the ground for an excellent hold.

Grapnel Style Anchors

This type of anchor is designed for use in rocky bottoms. They have characteristically long arms that hook onto a rock to safely secure your boat.

How to Choose the Right Anchor for Your Boat

If you are looking to purchase an anchor for your boat here are a few pointers to take into consideration.

Weight

Weight always plays second fiddle when selecting an anchor. However, for a mid-sized pontoon boat, a 15-20 pound will work just fine. For a larger boat, you can go for a more massive anchor.

Heavier anchors will work better, but that’s no guarantee. Remember that most of these pontoon boat anchors rely much on design than weight to securely hold the boat.

Design

Space is always an issue especially if you own a small boat. Therefore, its best you go for an anchor with foldable arms that packs downs to a small size. If you’re always on the go, one with a compact design will also be easier to carry around.

Build Material

Your anchor’s durability relies so much on the type of material used to build it. Most pontoon boat anchors are made using galvanized stainless-steel which is rust resistant. Additionally, if you find one with anti-fouling mechanics, the better.

Extra Features/Accessories

Some anchors are sold alongside handy features. These features may include, a retrieval ring, rope, and a padded storage bag. While it isn’t that much of a decisive factor, you can still consider it just to get the best deal for your money.

Setting Your Pontoon Boat Anchor

Here is a simple guide on how to set your pontoon boat anchor like a professional and under the least time possible. However, always exercise caution when you’re anchoring your boat.

Pick Out A Spot

Settle on where you want to anchor your boat. While at it, ensure that the boat is facing the wind/current direction.

Determine the Water’s Depth and Terrain at the Bottom

This may seem new to first-timers. Being familiar with the water’s depth will help you calculate which length of line you require to have your anchor latched firmly into the bottom.

The recommended amount of line is five times to the depth of the water is 5:1. This is in addition to the distance from the surface of the water to the anchor hooking point.

Switch the Engine Off

Its now time to turn the boat’s engine off, but before you do so, ensure the bow is a few meters ahead of your anchoring spot.

It’s Now Time to Anchor

Ensure that the anchor is securely fastened to the cleat before gently releasing it into the water. Do not throw the anchor for safety reasons as the line is more likely to intertwine.

Wind and water currents will drift your boat back a little to ensure the anchor sinks a little further away from the boat. If your boat is stationary, you can engage the reverse gear to move it slightly as you release the rode.

Fasten the Line

Once you’re comfortable with the anchoring to spot its now time you fasten the line to allow the anchor to dig in. Wrap the rode around the cleat two times. You can then reverse the boat slightly to ensure it backs down on the anchor for a firmer hold.

Retrieving Your Anchor

When you’re ready to leave, pull the anchor vertically to avoid scratching your pontoon. Clean the anchor of mud, dragging, or any other debris before storing it inside the boat.

Frequently Asked Questions

Q. Which type of anchor is right for my boat?

Well, this will largely depend on the terrain of the water bottom which you’re going to spend the most time on.

Here is a quick guide on the three major types of anchors and where they’re best suited. Box anchors work best in water bodies with muddy bottoms. Fluke anchors provide excellent service in water bodies with gravel/sandy bottoms. Grapnel style anchors are best suited for anchoring in waters with rocky bottoms.

Q. What is the correct anchor size for my pontoon?

The correct anchor size will depend on the weight and size of your boat. For a midsized boat, you’ll probably need a 15-20 lb. anchor.

Q. Should I consider water depth when purchasing an anchor?

Yes. If you’re going to sail in deep waters, you’ll need a much heavier anchor. Deeper waters have stronger drifts so you’ll need an anchor that’ll take the least possible time to sink to the bottom.

Q. Is an anchor winch that important?

If you have a heavy anchor, an anchor winch will come in handy during anchor retrieval. Additionally, if you have back problems, an anchor winch can help you set and retrieve your anchor without straining too much, just a push of the button.

Find more Fishing Guides and Reviews like this one in our Fishing Section

Leave a Reply

Your email address will not be published. Required fields are marked *